Ultrasound Probe Testing
ULTRASOUND PROBE TESTING
Validated. Verified. Trusted.
ISO/IEC 17025:2017 accredited ultrasound probe testing is the benchmark for repair integrity.
Repair is a claim. Validation is the proof.
The only way to prove an ultrasound probe is clinically ready after repair is through accredited ultrasound probe testing — not visual inspection, not continuity checks, but full-spectrum ultrasound probe testing under ISO/IEC 17025:2017 standards. At Acertara, we apply diagnostic-grade protocols to verify that every repair restores acoustic performance to OEM specifications.
Multiple OEM Certified
Industry Highest Successful Probe Repair Rate
Cloud-Based Documentation
13485:2016 Certified
Years in Business, Sonora + Acertara
Probes Repaired
Repairs without ultrasound probe testing for validation are not reliable.
Download the White Paper: ISO17025:2017 accredited testing is essential to ensurevalidation of ultrasound transducer repair results
The International Standard for Ultrasound Probe Testing
ISO/IEC 17025:2017 defines the required conditions and quality systems for producing accurate, repeatable, and traceable testing data. In the context of ultrasound probe testing, this means:
- Validating probe performance post-repair
- Supporting FDA 510(k) submissions
- Confirming alignment with IEC 60601-2-37 acoustic requirements
Applications for Ultrasound Probe Testing
Ultrasound probe testing requires calibrated measurement systems, trained personnel, and a controlled lab environment. ISO/IEC 17025:2017 ensures that acoustic testing is:
- Performed with calibrated hydrophones
- Repeatable across time and conditions
- Traceable to national metrology standards
We conduct ultrasound probe testing for each repaired device using protocols designed for OEM submissions. Every result is documented, archived, and linked to your device’s serial number.
Explore our FDA 510(k) Submission & Consulting Services.
ISO/IEC 17025 for Ultrasound Probe Testing
Many repair providers perform basic continuity or image-check assessments. These are not ultrasound probe tests. They are functional snapshots with no diagnostic rigor.
- No objective ultrasound probe testing to verify signal quality
- No benchmarked beam profile or sensitivity data
- No compliance-grade documentation
- No protection in audit or regulatory review
We set higher expectations and better examples for ultrasound probe testing.
- Quantitative acoustic performance validation
- Crystal-by-crystal failure detection
- Pre- and post-repair ultrasound probe testing with OEM benchmarks
- Audit-ready documentation
- Environmental control and traceability protocols
Testing without accreditation is opinion.
Testing with ISO/IEC 17025 is evidence.
Discover ultrasound probe testing services.
Ultrasound Probe Testing for Clinical Safety
Ultrasound transducers are active diagnostic devices. In fetal assessment, emergency triage, and procedural guidance, the integrity of the ultrasound probe determines the reliability of the clinical outcome.
Ultrasound probe testing is essential to patient care.
- Acoustic stack integrity affects beam shape and focus
- Signal fidelity impacts diagnostic contrast and artifact resolution
- Probe sensitivity influences lesion detection and vascular flow analysis
Without post-repair ultrasound probe testing, parameters are verified.
- Diagnostic error risk increases
- Device trustworthiness decreases
- Regulatory exposure grows
Acertara’s ultrasound probe testing ensures patient safety.
- Materials used in repair are pre-tested with accredited methods.
- Every probe undergoes full ultrasound probe testing before release.
- Results are stored within our ISO 13485:2016-certified quality system.
You’re not buying a certificate. You’re buying objective, lab-grade validation of clinical performance.
The Industry Benchmark for Ultrasound Probe Testing
Acertara combines two rare capabilities:
- A fully accredited ultrasound probe testing lab under ISO/IEC 17025:2017
- An ISO 13485:2016-certified medical device repair service
This integration ensures testing drives the repair — not the other way around.
- ATLAS™ diagnostic system for crystal-level failure analysis
- OEM-grade testing used in regulatory submissions
- Full-cycle documentation for every ultrasound probe tested and repaired
- Acoustic performance metrics logged pre- and post-repair
Partner With Acertara for Ultrasound Probe Testing
We don’t assume performance. We measure it and prove it with precision ultrasound probe testing against defined tolerances.
- Regulatory-grade ultrasound probe testing for every repaired device
- Transparent data trails for audit, QA, or FDA inspection
- Confidence in performance without overpaying for OEM replacement
- Support from a vertically integrated engineering and testing team
Reach Us
We want to hear from you about your current probe repair challenges. Drop us an email or call and ask to speak to one of our awesome Customer Service Representatives.
1950 Lefthand Creek Lane, Longmont, CO 80501
+1 303.834.8413